Showing posts with label Mercedes-Benz. Show all posts
Showing posts with label Mercedes-Benz. Show all posts

Wednesday, June 15, 2011

2011 SLS AMG GT3 Mercedes-Benz - Luxurious Super Sports cars

The Mercedes-Benz SLS AMG is one of the biggest supercar releases of the past year. But the company isn't content with just making ultra luxurious supercars for the rich and well dressed, they also plan on releasing a fully homologated GT3 race version for the gentleman racer.
2011 SLS AMG GT3 Mercedes-Benz
The GT3 racing version of the SLS AMG is powered by the same mid-front mounted 6.3 litre V8 engine as the road car. There'll probably be a few modifications for the race unit, but Mercedes haven't yet announced final power outputs or specifications. Or even a final weight figure. That's all for the FIA to decide in the near future as part of the homologation process.
2011 SLS AMG GT3 Mercedes-Benz
Power transmission in the SLS AMG GT3 is done through a six-speed sequential racing transmission with steering wheel shift paddles and an integrated multi-disc locking differential. As in the SLS AMG road car, the transmission is located at the rear axle for better weight distribution: the engine and transmission are connected by a torque tube within which a carbon-fibre shaft rotates at the engine speed.
2011 SLS AMG GT3 Mercedes-Benz
The Mercedes SLS AMG GT3 is instantly recognizable as belonging to the SLS AMG family - as any GT3 racer is. The biggest visual changes are a new front apron, new splitter, redesigned bonnet with additional air intakes and vents, new sideskirts which have air inlets for cooling the rear brakes, rear diffuser and a prominent adjustable rear wing. The C-pillars provide housing for the standardized filler pipes for the fast-refuel system.
2011 SLS AMG GT3 Mercedes-Benz
The communication of Daimler release says that “the AMG V8 engine with 6.3-liter is identical to that used in the serial sports car. With a low weight, however, sports car accelerates from standstill to 100 km/h for only 3.7 seconds (serial sprint for 3.9 seconds). The maximum speed was announced for 300 mph, but producers say they have more opportunities to raise her brakes are racing by AMG, as disks are ventilated. Front wheels are size 12×18, rear 13×18.
2011 SLS AMG GT3 Mercedes-Benz
Powering this race car is a 6.3-Liter V8 engine that produces 600HP and controlling all this power is a six speed racing transmission system with shift paddles mounted on the steering wheel. The SLS AMG GT3 is designed as a racing sports car for customers competing in sprints and long-distance races.
"Thanks to uncompromising lightweight construction and superior handling dynamics, the SLS AMG provides an outstanding basis for a highly competitive racing car. This exciting GT3 version is our response to strong customer demand for a car designed for these attractive motor sports car series," says Volker Mornhinweg, Chairman of Mercedes-AMG GmbH.
2011 SLS AMG GT3 Mercedes-Benz
The body of the 2011 SLS AMG GT3 is the most significant difference from the road car starting with the aggressive front fascia and splitter to the massive rear spoiler. The hood of the race model is also very different from the normal SLS AMG with a large center cooling vent that helps to move air to cool the engine and the braking system. Along the side of the car, vents have been added to cool the rear brakes without compromising aerodynamics and all of these improvements to the overall cooling effort of the car makes it ideal for long road races like the 12 Hours of Sebring.
2011 SLS AMG GT3 Mercedes-Benz 
The SLS AMG GT3 is equipped with a six-speed racing transmission with sequential shift. A steering wheel with a diameter of 13 inches facilitates perfect vehicle control. Because it is open at the top, the driver always has a perfect view of the central display, which provides all relevant information such as road speed, engine speed, operating temperatures, lap times and gear selection. The SLS AMG GT3 is also equipped with precisely calculated cooling channels – openings in the front skirt and ahead of the rear wheels direct cool airflow over the brake discs. All four brake discs are ventilated, slotted and drilled.
The 2011 Mercedes-Benz SLS AMG race car is expected to delivery scheduled prior to the start of the 2011 racing season. However, interested customers can order this awesome vehicle starting in autumn 2010. The Mercedes-Benz display at the 2010 New York Auto Show, the 2011 SLS AMG will carry a starting price-tag of $183,000 when it goes on sale.

Saturday, June 11, 2011

Mercedes McLaren Sports Cars ASMA Design Perfectus SLR 722

ASMA Design have modded the Mercedes-Benz McLaren sports cars SLR 722 to their specifications. The new ASMA Design Perfectus SLR 722 is totally redone with new aggressive custom carbon fibre bodywork and 20-inch wheels.
Mercedes McLaren Sports Cars ASMA Design Perfectus SLR 722
The original SLR only made 650-hp from the 5.4-litre supercharged V8, but this was not enough for ASMA Design, as they have upped the power to 750-hp, and this allows the ASMA Design Perfectus SLR to get from 0-100km/h in only 3.5 seconds, and then go onto a top speed of 216mph.
Making claims of perfection is a dangerous thing to do, especially in the exclusive and demanding world of supercar tuning. But there is one man who can actually make this claim of perfection, and even go as far as to name his incredible automotive creation Perfectus. And this Designer is Erturul ASMA and this is his amazing, all carbon fiber ASMA Mercedes McLaren SLR 722.
Carbon is the customizing material of choice for hardcore tuners alike, but until the unveiling of Perfectus, no-one had truly used this most beautiful and powerful material to its full and awe-inspiring effect. But, as these stunning pictures can only prove, Erturul ASMA has taken the McLaren to entirely new levels of automotive theatre. In fact, thanks to Perfectus, you can forget about the world of top-end tuning here on Earth, and now, and only now, think in terms of an awesome new age of carbon customization.
Wide arch at over 2-metres in total width, with over 10cms of super-phat and super-sculpted carbon over each of the one-off ASMA rims, rims that are also mind-blowing in their dimensions. How does 325-25-20 out the back and 255-30-20 up front grab you? Hard! And once this stunning carbon design grabs you, it will never let you go.
The wide ‘n’ wild completely custom carbon fiber bodywork is simply unmatched and unbeatable, anywhere in the world. Sharp, extra-aggressive F1-inspired bodylines take this SLR to whole new levels of road-presence; this SLR is always in full attack mode, making 700hp to back-up the ASMA Design styling.
Only Erturul ASMA can make and prove his claims of perfection, but he must also apologize… apologize to all the owners of standard SLRs everywhere, for there can be only one Perfectus.

Thursday, June 9, 2011

Mercedes-Benz Sports Cars SL R230 PD

PRIOR design presented their latest wide-body kit, the PD-SERIES based on the Mercedes-Benz SL R230. The Prior Design Mercedes-Benz SL R230 comes with a front spoiler with large, greedy air inlets. The cowl with its many air inlets reaches up to the windshield supplying even high-performance motors with sufficient air. 
 Mercedes-Benz Sports Cars SL R230 PD Series by Prior Design
For the rear side, the large track of the PD-SERIES is connected by a perfectly rounded rear bumper from one wheel arch to the other, which in turn is equipped with a diffuser based on racing technology. It is available either as sight carbon or full carbon.
The PD Series inspiration very clearly was the super sports car Mercedes-Benz SL65 AMG Black Series. The result will excite every car enthusiast : Flowing lines, massive air inlets, expressive curves and muscular sides summarize the perfect PD Series view. The side are with its wide wheels is reminiscent of a muscular monster waiting to jump its prey. The side dills harmoniously connect the masculine sides to make the car look as if made from a single cast.
The large track of the PD series is connected by a perfectly rounded rear diffuser from one wheel arch to the other, which in turn is equipped with a diffuser based on racing technology. It is available either as sight carbon or full carbon.
The 2010 Mercedes-Benz SL R230 PD Series a specially developed wheel or tyres combination is available as a complete set in the following sizes : Wheel rim PD1 (three-piece stainless steel outer bed, black finish), front axle 10×20 inch with 265/30R20, rear axle 12×20 inch with 305/25R20.

Saturday, March 26, 2011

Mercedes-Benz Sports Cars SL R230 PD Series by Prior Design

PRIOR design presented their latest wide-body kit, the PD-SERIES based on the Mercedes-Benz SL R230. The Prior Design Mercedes-Benz SL R230 comes with a front spoiler with large, greedy air inlets. The cowl with its many air inlets reaches up to the windshield supplying even high-performance motors with sufficient air. 
2010 Mercedes-Benz Sports Cars SL R230 PD Series by Prior Design
For the rear side, the large track of the PD-SERIES is connected by a perfectly rounded rear bumper from one wheel arch to the other, which in turn is equipped with a diffuser based on racing technology. It is available either as sight carbon or full carbon.
The PD Series inspiration very clearly was the super sports car Mercedes-Benz SL65 AMG Black Series. The result will excite every car enthusiast : Flowing lines, massive air inlets, expressive curves and muscular sides summarize the perfect PD Series view. The side are with its wide wheels is reminiscent of a muscular monster waiting to jump its prey. The side dills harmoniously connect the masculine sides to make the car look as if made from a single cast.
The large track of the PD series is connected by a perfectly rounded rear diffuser from one wheel arch to the other, which in turn is equipped with a diffuser based on racing technology. It is available either as sight carbon or full carbon.
The 2010 Mercedes-Benz SL R230 PD Series a specially developed wheel or tyres combination is available as a complete set in the following sizes : Wheel rim PD1 (three-piece stainless steel outer bed, black finish), front axle 10×20 inch with 265/30R20, rear axle 12×20 inch with 305/25R20.

Blog Archive